Tüpraş petcoke, Tüpraş İzmit refinery, Residium Upgrading Project, Tüpraş RUP Gelcoat applied Fibroser FRP panel Embossed FRP panel Fibroser FRP roofs for thermal pools Weather safety Fibroser FRP FRP fire resistance FRP shelter Fibroser FRP shelter roof Translucent FRP industrial roof panels Anti-corrosive roof, transparent roof, translucent roof, manure drying roof
Fibroser - bringing natural light into the buildings
  Fibroser FRP panels

Fibroser translucent FRP panels allowing high daylight penetration up to 90% are among the top construction materials of the industrial buildings, prestigious sports facilities, agricultural facilities, etc. in Turkey and the world with their superior technical specs and robustness, crucial for wide span roofs and walls/facades.

Fibroser FRP roof panels

Resistance

Fibroser Fiberglass Reinforced Plastic Panels are;

  • heat resistant from -40 °C to +120 °,
  • waterproof with very low moisture absorption ratio,
  • resistant to chemicals,
  • anticorrosive,
  • resistant to UV and surface aging,
  • resistant to impacts and crashes.
Fibroser FRP, Incombustibility

Safety, strength

Fibroser is classified as Class 1 and Class 3 fire resistant according to BS 476-7. Panels avoid fire spread and extinguish themselves.

Fibroser panels are electrical insulators and avoid high voltage arc discharges.

Panels are resistant to natural stress factors as wind, hail fall, snow load etc., have been tested to ACR (M) 001:2000 by BRE Ltd. UK and are classified as Class B.

Fibroser roof panels

Areas of use

Fibroser translucent FRP roof and wall panels are used with great performance in:

  • industrial buildings, plants, facilities,
  • chemicals plants,
  • facilities and plants for food industry,
  • fertilizer drying facilities and areas,
  • sports facilities and thermal pools,
  • tourist facilities,
  • fair, tradeshow and marketplace areas,
  • storehouses, warehouses, garrages, shelters, canopies and arbors,
  • glasshouses, agricultural and stockbreeding facilities etc.
 
Some practices and reviews (click to view)
Polikarbonat Korozyon Meyve kurutma

Corrosion in the sun drying facilities

Various acids and corrosive liquids evaporating during the dehydration of fruits cause weak transparent roofing and facade materials as polycarbonates corrode in solar drying facilities.

The exteriors are exposed to UV aging and all kinds of harsh weather conditions, and materials lose their structural characteristics as light permeability, mechanical strength, etc.

CTP Korozyonsuz meyve kurutma

Corrosion-free fruit drying with Fibrosan products

GRP roof and wall panels produced by Fibrosan:

  • provide full protection against liquid and gaseous chemical corrosives,
  • are resistant to all weather conditions and acid rains,
  • are resistant to all negative and aging effects of the sun,
  • can be used in all types of solar drying facilities,
  • are resistant to all corrosive gases and liquids coming out during drying process.
  • are very easy to clean and provide stainproof walls, ceilings and roofs,
  • are maintenance-free.
Fibroser Technical Specifications and Quality Standards (click to view)
Fibroser Quality Certificates and Standards
Fibroser TSE Quality Certificate Fibroser Siemens Mechanical Tests Fibroser Warrington Fire Test Fibroser BRE Impact Test
Conformity Certificate
TS-EN 1013-2
TSE Approved Test Laboratory
Mechanical Tests
Spread of Flame Test
BS 476-7 Class 1 - Class 3
Fragility Test
ACR(M) 001:2000 Class B
Fibroser branded products conform TS EN 1013-2 Quality Standard as per the Quality Certificate of Turkish Standards Institute issued 35-14.01/215. Technical specifications were quoted from the report nr.4660 of TSE approved Siemens Laboratories containing the results of Tensile Strength, Bending, Compression, Charpy Resistance, Elasticity Modulus, Disruptive Voltage, Specific Diffusion and Surface Resistance, Water Absorbtion tests and Specific Weight measurements. Fibroser product samples are tested and classified as Class-1 and Class-3 Fire Resistant according to BS 476-7 by Warrington Fire Research. Test results are recorded in reports Nr. 127 370 and 112 736. Fibroser product samples are tested by BRE England and classified as Class B according to the test method BS 4154 of The British Standards Institution. Test results are recorded in the report Nr. 209 612.
Fibroser Product Range
Attribute ECO STD EXT ACR FRT CRT
Definition Economical Standard Extra Acrylic Fire Resistant Anticorrosive
Type of Resin Orthophthalic Acrylic Special Isophthalic
Thickness Optimum Standard
Strength Optimum Standard Extra
UV Stabilization - Present
UV Resistance Standard High
Resistance to Weather Conditions Standard High
TS EN 1013-2 - Compliant
BS 476-7 Class-1 Fire Resistance - Certificated -
Resistance to Heat and Chemicals Standard High
Fibroser Surface Range
Surface Code Description
SS (Standard Surface) No protective layer
FC (Standard Film Coated Surface) Retards the yellowing and abrasion from sunlight
FX (Extra Film Coated Surface) Provides extra UV resistance against extensive sunlight exposure, protects translucency of the panel
ER (Embossed Surface) Increases light diffusion and provides special surface esthetic
GC (Gel-coated surface) Provides optional smoothness for flat panel surface
Fibroser EXT 1.5 mm Technical Specifications
Attribute Standard Unit Value
Tensile Strength ISO 527-4 N/mm² 63
Bending Strength ISO 178 N/mm² 136
Compression Strength DIN EN ISO 604 N/mm² 132
Charpy Impact Strength DIN EN ISO 179 KJ/mm² 42.3
Elasticity Modulus DIN EN ISO 178 N/mm² 7579
Electrical Strength DIN IEC 60243-2 KV/mm 12.7
Specific Volume Resistivity DIN IEC 93 Ω cm 3.4x1014
Specific Surface Resistance DIN IEC 93 Ω cm 1.3x1014
Water Absorption DIN EN ISO 62 mg 16.3
Specific Weight Measurement DIN 53479 g/cm³ 1.215
Hardness BARCOL 934-1 - 50-60
Heat Resistance - °C -40 +120
Heat Flux, Thermal Transmission ASTM C-177 W/mk 0.15 - 0.25
Light Transmission - - %85 - 90
Fire Resistance Class* - Fibroser EXT 1.5 mm BS 476 PART 7 - Class 3
Fire Resistance Class* - Fibroser EXT 1.0 mm BS 476 PART 7 - Class 1
Non-Fragility Class** ACR(M) 001:2000 - Class B (non-fragile)

* = tested and certificated by Warrington Fire Research/UK.
** = tested and certificated by BRE Ltd./UK.

Representative Thicknesses and Weights
Attribute Fibroser STD Fibroser EXT
Thickness (mm) 0.9 1.0 1.2 1.5 1.8 2.0 2.5 3.0 0.9 1.0 1.2 1.5 1.8 2.0 2.5 3.0
Fiberglass Ratio* (%) 25 30
Flat Panel Weight* (gr/m²) 1200 1333 1600 2000 2400 2667 3334 4001 1285 1430 1715 2135 2560 2850 3560 4270

* = Before corrugation

Tolerances
Attribute Tolerance
Unit Weight ± 5%
Thickness ± 15% (corrugated panel)
Thickness ± 5% (flat panel)
Width ± 1 cm
Length +1.5 / -1 cm for 0-5 m +2 / -1 cm for 5-10 m +5 / -1.5 cm for <10 m
Fibroser Profile Range (click to view)
Profile 110 Profile 111
Fibroser Profil Fibroser Profil
Profile Form Width (mm) Profile Form Width (mm)
94/38 Onduline minimum 0.9 93/36 Corubit minimum 0.9
 
Profile 205 Profile 206
Fibroser Profil Fibroser Profil
Profile Form Thickness (mm) Profile Form Thickness (mm)
177/51 5 rock wool based corrugated panel minimum 0.9 177/51 6 rock wool based corrugated panel minimum 0.9
 
Profile 213 Profile 235
Fibroser Profil Fibroser Profil
Profile Form Thickness (mm) Profile Form Thickness (mm)
840/55 Almetsan minimum 0.9 246/37 Mepan minimum 0.9
 
Profile 237 Profile 270
Fibroser Profil Fibroser Profil
Profile Form Thickness (mm) Profile Form Thickness (mm)
203/41 Mepaş narrow trapeze minimum 0.9 245/75 Noksel trapeze minimum 0.9
 
Profile 312 Profile 314
Fibroser Profil Fibroser Profil
Profile Form Thickness (mm) Profile Form Thickness (mm)
76/18 Sheet gutter (narrow) 12 gutter minimum 0.9 76/18 Sheet gutter (wide) 15 gutter minimum 0.9
 
Profile 402 Profile 405
Fibroser Profil Fibroser Profil
Profile Form Thickness (mm) Profile Form Thickness (mm)
302/38 Assan AS-RP/302 minimum 0.9 148/38 Nasaş trapeze minimum 0.9
 
Profile 406 Profile 406-6
Fibroser Profil Fibroser Profil
Profile Form Thickness (mm) Profile Form Thickness (mm)
200/27 Galvanized trapeze / 5 minimum 0.9 200/27 Galvanized trapeze / 6 minimum 0.9
 
Profile 407 Profile 408
Fibroser Profil Fibroser Profil
Profile Form Thickness (mm) Profile Form Thickness (mm)
333/35 Park Panel minimum 0.9 250/40 TR Mekon minimum 0.9
 
Profile 409 Profile 410
Fibroser Profil Fibroser Profil
Profile Form Thickness (mm) Profile Form Thickness (mm)
100/18 Panaline / 9 minimum 0.9 100/18 Panaline / 10 minimum 0.9
 
Profile 415 Profile 419
Fibroser Profil Fibroser Profil
Profile Form Thickness (mm) Profile Form Thickness (mm)
510/40 Tekiz SPC 1015 minimum 0.9 167/19 Corus Yassan 19/1000 Ç minimum 0.9
 
Profile 425 Profile 430
Fibroser Profil Fibroser Profil
Profile Form Thickness (mm) Profile Form Thickness (mm)
250/40 Corus Yassan 40/1000 Ç minimum 0.9 900/40 Tekiz SPC/300 minimum 0.9
 
Profile 432 Profile 433
Fibroser Profil Fibroser Profil
Profile Form Thickness (mm) Profile Form Thickness (mm)
333/47 47/1000 trapeze minimum 0.9 250/32 Teknopanel minimum 0.9
 
Profile 434 Profile 435
Fibroser Profil Fibroser Profil
Profile Form Thickness (mm) Profile Form Thickness (mm)
164/34 Assan master panel 1000 R minimum 0.9 250/35 Aluform minimum 0.9
 
Profile 436 Profile 437
Fibroser Profile Fibroser Profile
Profile Form Thickness (mm) Profile Form Thickness (mm)
250/36 Panelsan minimum 0.9 500/37 Nuh Panel minimum 0.9
 
Profile 438 Profile 440
Fibroser Profile Fibroser Profile
Profile Form Thickness (mm) Profile Form Thickness (mm)
151/38 Assan ATR 7 minimum 0.9 180/40 Tekiz DK 90 minimum 0.9
 
Profile 441 Profile 442
Fibroser Profile Fibroser Profile
Profile Form Thickness (mm) Profile Form Thickness (mm)
200/42 Spig trapeze minimum 0.9 235/42 Assan ATR 5 minimum 0.9
 
Profile 443 Profile 444
Fibroser Profile Fibroser Profile
Profile Form Thickness (mm) Profile Form Thickness (mm)
500/30 İzopoli minimum 0.9 180/45 Almetsan trapeze minimum 0.9
 
Profile 445 Profile 450
Fibroser Profile Fibroser Profile
Profile Form Thickness (mm) Profile Form Thickness (mm)
150/45 Aluform minimum 0.9 207/50 Assan minimum 0.9
 
Profile 451 Profile 452
Fibroser Profile Fibroser Profile
Profile Form Thickness (mm) Profile Form Thickness (mm)
151/38 Assan ATR 7 minimum 0.9 500/34 Assan 1000 R 3 minimum 0.9
 
Profile 453 Profile 454
Fibroser Profile Fibroser Profile
Profile Form Thickness (mm) Profile Form Thickness (mm)
250/42 Vaw Aluform 1000/40/85 minimum 0.9 333/35 Atermit isopanel minimum 0.9
 
Profile 457 Profile 470
Fibroser Profil Fibroser Profil
Profile Form Thickness (mm) Profile Form Thickness (mm)
150/50 Assan minimum 0.9 462/40 Yapel YC 924/3 minimum 0.9
 
Profile 471 Profile 488
Fibroser Profile Fibroser Profile
Profile Form Thickness (mm) Profile Form Thickness (mm)
235/55 Tekiz ÇK 71 minimum 0.9 245/38 Almetsan minimum 0.9
 
Profile 490 Profile 600
Fibroser Profile Fibroser Profile
Profile Form Thickness (mm) Profile Form Thickness (mm)
300/55 Tekiz ÇK 90 minimum 0.9 Flat minimum 0.9
 
Profile 604 Profile 700
Fibroser Profile Fibroser Profile
Profile Form Thickness (mm) Profile Form Thickness (mm)
200/32 Facade panel minimum 0.9 Standard ridge minimum 0.9
 
Profile 800 Profile 804
Fibroser Profile Fibroser Profile
Profile Form Thickness (mm) Profile Form Thickness (mm)
300/32 trapeze minimum 0.9 290/38 trapeze 4 gutter minimum 0.9
 
Profile 806 Profile 807
Fibroser Profile Fibroser Profile
Profile Form Thickness (mm) Profile Form Thickness (mm)
200/31.5 minimum 0.9 127/38 trapeze 7 gutter minimum 0.9
 
Profile 808 Profile 815
Fibroser Profile Fibroser Profile
Profile Form Thickness (mm) Profile Form Thickness (mm)
127/38 trapeze 8 gutter minimum 0.9 148/38/890 minimum 0.9
 
Profile 820 Profile 822
Fibroser Profile Fibroser Profile
Profile Form Thickness (mm) Profile Form Thickness (mm)
200/20/1000 minimum 0.9 146/19 Park Panel T-8 1022 minimum 0.9
 
Profile 824 Profile 825
Fibroser Profile Fibroser Profile
Profile Form Thickness (mm) Profile Form Thickness (mm)
167/24/1000 minimum 0.9 200/30/1000 minimum 0.9
 
Profile 829 Profile 830
Fibroser Profile Fibroser Profile
Profile Form Thickness (mm) Profile Form Thickness (mm)
100/29/1100 minimum 0.9 130/30/910 minimum 0.9
 
Profile 834 Profile 835
Fibroser Profile Fibroser Profile
Profile Form Thickness (mm) Profile Form Thickness (mm)
167/34/1000 minimum 0.9 207/35/1035 minimum 0.9
 
Profile 837 Profile 838
Fibroser Profile Fibroser Profile
Profile Form Thickness (mm) Profile Form Thickness (mm)
250/37/1000 minimum 0.9 273/38 H-8 trapeze minimum 0.9
 
Profile 839 Profile 845
Fibroser Profiel Fibroser Profile
Profile Form Thickness (mm) Profile Form Thickness (mm)
159/39/954 minimum 0.9 333/45/1000 minimum 0.9
 
Profile 846 Profile 870
Fibroser Profile Fibroser Profile
Profile Form Thickness (mm) Profile Form Thickness (mm)
204/30/1020 minimum 0.9 250/70 Yun-Ak minimum 0.9
 
Profile 880 Profile 890
Fibroser Profile Fibroser Profile
Profile Form Thickness (mm) Profile Form Thickness (mm)
250/80/1000 minimum 0.9 250/90 Yun-Ak minimum 0.9
 
Profile 892 Profile 940
Fibroser Profile Fibroser Profil
Profile Form Thickness (mm) Profile Form Thickness (mm)
460/32 Assan prefabricated minimum 0.9 235/40 Tekiz SPC 940 minimum 0.9
 
Profile 941 Profile 967
Fibroser Profil Fibroser Profil
Profile Form Thickness (mm) Profile Form Thickness (mm)
157/38 Corus Yasan 38/940 minimum 0.9